FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.

HTS CodeDescriptionSupplementary Unit
7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel:
7228.10.00- Bars and rods, of high-speed steel
7228.10.00.10- - Not cold-formed["kg"]
- - Cold-formed:
7228.10.00.30- - - With a maximum cross-sectional dimension of less than 18 mm["kg"]
7228.10.00.60- - - With a maximum cross-sectional dimension of 18 mm or more["kg"]
7228.20- Bars and rods, of silico-manganese steel:
7228.20.10.00- - Not cold-formed["kg"]
7228.20.50.00- - Cold-formed["kg"]
- Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7228.30- - Of tool steel (other than high-speed steel):
7228.30.20.00- - - Of ball-bearing steel["kg"]
7228.30.40.00- - - Of chipper knife steel, not cold-formed["kg"]
7228.30.60.00- - - Other["kg"]
7228.30.80- - Other
7228.30.80.05- - - Of high-nickel alloy steel["kg"]
7228.30.80.10- - - Concrete reinforcing bars and rods["kg"]
- - - Other:
7228.30.80.15- - - - With a diameter of less than 76 mm["kg"]
7228.30.80.41- - - - With a diameter of 76 mm or more but not exceeding 152 mm["kg"]
7228.30.80.45- - - - With a diameter of 152 mm or more but not exceeding 228 mm["kg"]
7228.30.80.70- - - - With a diameter exceeding 228 mm["kg"]
7228.40.00.00- Other bars and rods, not further worked than forged["kg"]
7228.50- Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10- - Of tool steel (other than high-speed steel)
7228.50.10.10- - - Of ball-bearing steel["kg"]
- - - Other:
- - - - With a maximum cross-sectional dimension of less than 18 mm:
7228.50.10.20- - - - - Of round or rectangular cross section with surfaces ground, milled or polished["kg"]
7228.50.10.40- - - - - Other["kg"]
- - - - With a maximum cross-sectional dimension of 18 mm or more:
7228.50.10.60- - - - - Of round or rectangular cross section with surfaces ground, milled or polished["kg"]
7228.50.10.80- - - - - Other["kg"]
7228.50.50- - Other
7228.50.50.05- - - Of high-nickel alloy steel["kg"]
- - - Other:
7228.50.50.15- - - - With a diameter of less than 76 mm["kg"]
7228.50.50.40- - - - With a diameter of 76 mm or more but not exceeding 228 mm["kg"]
7228.50.50.70- - - - With a diameter exceeding 228 mm["kg"]
7228.60- Other bars and rods:
7228.60.10- - Of tool steel (other than high-speed steel)
7228.60.10.30- - - Of ball-bearing steel["kg"]
7228.60.10.60- - - Other["kg"]
- - Other:
7228.60.60.00- - - Not cold-formed["kg"]
7228.60.80.00- - - Cold-formed["kg"]
7228.70- Angles, shapes and sections:
7228.70.30- - Hot-rolled, not drilled, not punched and not otherwise advanced
7228.70.30.10- - - U, I, H and T sections["kg"]
- - - Other:
- - - - With a maximum cross-sectional dimension of 76 mm or more:
7228.70.30.20- - - - - Angles["kg"]
7228.70.30.41- - - - - Other["kg"]
- - - - With a maximum cross-sectional dimension of less than 76 mm:
7228.70.30.60- - - - - Angles["kg"]
7228.70.30.81- - - - - Other["kg"]
7228.70.60.00- - Other["kg"]
7228.80.00.00- Hollow drill bars and rods["kg"]