# HS Code pour machines pour l'équilibrage de pièces mécaniques

Source: https://www.findhs.codes/hs-code-pour-machines-pour-l-equilibrage-de-pieces-mecaniques

> Le code SH à 6 chiffres pour machines pour l'équilibrage de pièces mécaniques est 9031.10. Les 6 premiers chiffres sont identiques dans tous les pays du Système harmonisé ; le code national complet à 8-10 chiffres (ex. TARIC UE, HTSUS États-Unis) dépend du pays de destination.

## HS codes (6-digit)

| HS Code (6-digit) | Description | Sample product |
|---|---|---|
| 9031.10 |  | vehicle maintenance machines and components |
| 9031.10 |  | So -called mobile tire fleeting machine, in the form of an unobstructed goods, essentially consisting of 1) a cylinder -like base (Ø 290 mm) made of enamelled cast iron, 2) a rod made of base metal with a thread in the lower area with two pre -assembled hexagon nuts and washers as well as 3) A cy... |

Full national tariff codes (8-10 digits, e.g. EU TARIC, US HTSUS, UK, China, Japan, India, Turkey) and applicable customs duty rates are available on https://www.findhs.codes/hs-code-pour-machines-pour-l-equilibrage-de-pieces-mecaniques for registered users.

## Notes

Machines for balancing mechanical parts (dynamic, static or with an electronic balancing device) e.g., armatures, rotors, crank shafts, connecting rods, propeller shafts, wheels, flywheels. In dynamic machines, the parts are rotated on two bearing blocks or between centres, the out-of-balance being measured mechanically (tracing of diagrams on a recording plate, spring balance principle, etc.). Static balancing machines operate on the tilting principle, the out-of-balance being measured on scales or dials. They differ from dynamic machines in that the part to be balanced does not rotate. Out-of-balances are compensated either by counterweights or removal of material. On machines fitted with an electronic balancing device, the vibrations due to unbalance are detected by a special sensitive element and are then amplified. This heading also covers balancing machines fitted with a machine-tool (drilling-machine, for example) and used exclusively for rectifying out-of-balances.

