HTS Code for hose clamps


Product
hose clamps
HTS Code
See HTS Code Now

Sample products for "hose clamps"

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 10.Aug.2015 - 09.Aug.2021

plastic compression fittings consisting of two semi-spherical halves with two mounting holes and a half-round recess, used for pipe and hose assembly

Description auto translated : In the article illustrated by a picture is called pipe clip body, consisting of two half shells made of molded plastics as defined in Note 1 to Chapter 39 (lt. Application inter alia of PP and PA), each extending through two mounting holes and one located centrally, semicircular recess distinguished. The fabricated in different dimensions were used for pipe and hose assembly. Such products are tariff classification as' other goods made of plastics, other than covered by the TARIC codes 3926 1000 9097 80 00-3926 "queued.

Original Description: Bei dem durch eine Abbildung veranschaulichten Artikel handelt um sogenannte Rohrschellenkörper, bestehend aus zwei Schellenhälften aus formgepressten Kunststoffen im Sinne der Anmerkung 1 zu Kapitel 39 (lt. Antrags u.a. aus PP und PA), die sich jeweils durch zwei Montagebohrungen sowie einer mittig befindlichen, halbrunden Aussparung auszeichnen. Die in unterschiedlichen Abmessungen gefertigten Waren dienen zur Rohr- und Schlauchmontage.Derartige Erzeugnisse werden zolltariflich als "andere Ware aus Kunststoffen, andere als von den TARIC-Codes 3926 1000 00 bis 3926 9097 80 erfasst" eingereiht.

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 07.Oct.2019 - 06.Oct.2022

Steel cast clamp, consisting of two jaw pieces and two tongues (inner clamping parts), held together on each side by a screw and nut, made from non-rusting steel (material 1.4401) in the fine casting process

Description auto translated : Hose clamp made of cast steel. The goods are so-called hose clamps, consisting of two clamping jaws and two tongues (internal clamping pieces), which are pressed together on each side with a screw and nut. The clamping jaws and tongues are made of stainless steel (material 1.4401) using the investment casting process. manufactured, the screws and nuts are made of stainless steel, not cast. The cast parts determine the character of the product. The product is available in different dimensions. The product is to be classified as “other cast steel products” under TARIC code 7325 9990 90.

Original Description: Schlauchklemme aus Stahlguss. Bei der Ware handelt es sich um sog. Schlauchklemmen, bestehend aus zwei Klemmbacken und zwei Zungen (innenliegende Klemmstücke), die an jeder Seite mit einer Schraube und Mutter zusammengepresst werden.Die Klemmbacken und Zungen sind im Feingussverfahren aus nicht rostendem Stahl (Werkstoff 1.4401) gefertigt, die Schrauben und Muttern sind aus nichtrostendem Stahl, nicht gegossen, gefertigt.Die gegossenen Teile bestimmen den Charakter der Ware.Die Ware ist in unterschiedlichen Abmessungen erhältlich.Die Ware ist als "andere Ware aus gegossenem Stahl" in den TARIC-Code 7325 9990 90 einzureihen.

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 19.Jan.2023 - 18.Jan.2026

Pool Adapter 12-piece bypass set, consisting of a 3-way plastic valve with three inlets and outlets (4.4 cm diameter), a fixed shut-off valve with adjustable mechanism for three different directions, and an integrated plastic flap to open or close the fluid flow - used for regulating fluid flow (e.g. in solar systems or heat pumps)

Description auto translated : Sog. Pool Adapter 12-tlg. Bypass set consisting of a 3-way valve made of plastic with three on or. outlets (diameter 4.4 cm), a permanently mounted shut-off valve with an adjustment mechanism for three different directions and an integrated plastic flap for closing or opening. Opening of the water flow - for figure see appendix -, - for regulating the flow (opening and closing) of liquids (e.g. B. in solar systems or heat pumps), - in a common sales container with six hose sleeves including hose clamps, Teflon tape (8.0 m), three adapters and a T-piece (accessory pack). The 3-way valve determines the character of the whole because of its value and importance for use. "Fittings for pipes or hoses, not a product of TARIC codes 8481 1005 10 to 8481 8069 99, Valve, not of cast iron or steel, not covered by TARIC codes 8481 8079 10 to 8481 8079 30 (package of goods put up for the Single sale from a 3-way valve - character-determining - and accessory pack) - so-called. Pool Adapter 12-tlg. Bypass-Set".

Original Description: Sog. Pool Adapter 12-tlg. Bypass-Set- bestehend aus einem 3-Wege-Ventil aus Kunststoff mit drei Ein- bzw. Ausgängen (Durchmesser  4,4 cm), einem fest daran montierten Absperrhahn mit einem Verstellmechanismus für drei ver-  schiedene Richtungen sowie einer integrierten Klappe aus Kunststoff zum Verschließen bzw. Öffnen  des Wasserdurchflusses - Abbildung siehe Anlage -,- zur Regelung des Durchflusses (Öffnen und Schließen) von Flüssigkeiten (z.B. in Solaranlagen  oder Wärmepumpen),- in einer gemeinsamen Verkaufsumschließung mit sechs Schlauchhüllen inklusive Schlauchklemmen,  Teflonband (8,0 m), drei Adaptern sowie einem T-Stück (Beipack).Das 3-Wege-Ventil bestimmt aufgrund des Wertes und der Bedeutung für die Verwendung den Charakterdes Ganzen."Armatur für Rohr- oder Schlauchleitungen, keine Ware der TARIC-Codes 8481 1005 10 bis 8481 8069 99, Ventil, nicht aus Gusseisen oder Stahl, nicht von den TARIC-Codes 8481 8079 10 bis 8481 8079 30 erfasst (Warenzusammenstellung in Aufmachung für den Einzelverkauf aus einem 3-Wege-Ventil - cha- rakterbestimmend - und Beipack) - sog. Pool Adapter 12-tlg. Bypass-Set"

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : SPAIN

Date Of Issue : 01.Mar.2023 - 28.Feb.2026

stamped zinc-plated steel clamp with m8/m10 internally threaded bolt, welded by electro fusion, for plastic tubes with optional single/dual m6 zinc-plated steel screws

Description auto translated : Stamped zinc-plated steel clamp with M8 M10 internally threaded bolt and welded by electro fusion. The clamp has a smooth insulation strip on the inside made of green EPDM rubber and plastic spacer washers on the sides. The clamps can be used for fixed and sliding points. They are presented in boxes of 25 to 50 units and in drawers from 50 to 200 units, in two different models; for small sizes of plastic tube from diameter 16 to 50 mm that have a single M6 zinc-plated steel screw on one side and for large sizes from 63 to 160 mm that have two M6 zinc-plated screws, one on each side.

Original Description: Abrazadera estampada de acero cincado con bulón internamente roscado M8+M10 y soldado por electro fusión. La abrazadera tiene incorporada una banda de aislamiento lisa en su parte interior de caucho EPDM de color verde y arandelas espaciadoras de plástico en los laterales.Las abrazaderas pueden usarse para puntos fijos y deslizantes.Se presentan en cajas de 25 a 50 unidades y en cajones de 50 a 200 unidades, en dos modelos diferentes; para medidas pequeñas de tubo de plástico desde diámetro 16 hasta 50 mm que tienen un tornillo único en un lateral M6 de acero cincado y para medidas grandes desde 63 hasta 160 mm que tienen dos tornillos cincados de M6, uno en cada lateral.

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge

See also

By clicking "Find Related HTS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "hose clamps".

You can also find customs duty rates applicable for importing of "hose clamps" into the USA and the European Union Countries.



Need an EXPERT assistance?


If you do not find what you are looking for, or if you cannot decide whether you find the correct results, you may apply for our tariff classification service

Tariff Classification Service

FIND THE CORRECT HS CODES
easily, anywhere

Available on Google Play and Apple App Store


HS Code finder and HTS Code, HS Codes
close

Experience the convenience of Search by Image feature

don't show again

FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.

test

test