HS Code for cutter boards


Product :
cutter boards
HS Code :
Find Related HS Code or Search By Image

Sample products for "cutter boards"

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 04.Dec.2014 - 03.Dec.2020

a rectangular glass plate with ground edges and rounded corners, used for tables or kitchen, made of ordinary clear glass. It has a corrugated top surface, a picture of fruit motifs on the back side, and is equipped with four plastic clips.

Description auto translated : Glassware for table or in the kitchen, so-called cutting plate glass, type 541404, Photo see attachment - in the form of a rectangular plate with polished edges and rounded corners, - in dimensions. Approx. 30 cm (length) x 20 cm (width) x 0.5 cm (thickness) - lt application of ordinary, of clear glass, -. grooved on the top - on the back with a picture covered with fruit motifs and equipped with four plastic nubs "glassware for use. at the table or in the kitchen (glass cutting board), ordinary glass "

Original Description: Glasware zur Verwendung bei Tisch oder in der Küche, sog. Schneidplatte Glas, Art. 541 404, Foto siehe Anlage, - in Form einer rechteckigen Platte mit geschliffenen Kanten und abgerundeten Ecken, - in den Abmessungen: ca. 30 cm (Länge) x 20 cm (Breite) x 0,5 cm (Dicke), - lt. Antrag aus gewöhnlichem, klarsichtigem Glas, - auf der Oberseite geriffelt, - auf der Rückseite mit einem Bild mit Obstmotiven beklebt und mit vier Kunststoffnoppen ausgestattet."Glasware zur Verwendung bei Tisch oder in der Küche (Glasschneideplatte), aus gewöhnlichem Glas"

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 02.Mar.2017 - 01.Mar.2020

Bamboo cutting board, made of three cross-glued layers of bamboo wood, with a thickness of approximately 10 mm, and equipped with one-sided grooved edge and rounded corners, as well as non-slip feet on the underside and top side. It is designed for cutting and preparing food in the kitchen or at the table.

Description auto translated : "Bamboo cutting board, Art. 050709, 050710, 050711" - rectangular board (approx. 10 mm thick) of three cross-glued layers of bamboo (= woody material) (dimensions approx .: 44, 5 x 30, 5 cm, 36, 8 x 25, 4 cm, 29, 2 x 20, 3 cm), with one-sided milled drain groove and rounded edges, with grifflick, - on the upper and lower side with four anti-slip feet (silicone, according to application) And preparing food in the kitchen and at the table. (Example see appendix) The character of the cutting board is determined by the wood. "Woodware for use at the table or in the kitchen, made of bamboo, cutting board (composite material of wood - characterizing - and plastic), so-called bamboo cutting board."

Original Description: "Bambus-Schneidebrett, Art. 050709, 050710, 050711"- rechteckiges Brett (ca. 10 mm dick) aus drei kreuzverleimten Lagen aus Bambus (=holziger Stoff) (Abmessungen ca.: 44,5 x 30,5 cm, 36,8 x 25,4 cm, 29,2 x 20,3 cm), mit einseitig eingefräster Ablaufrille und abgerundeten Kanten, mit Griffloch,- auf Unter- und Oberseite mit vier rutschhemmenden Füßchen (Silikon, lt. Antrag) ausgestattet, - zum Schneiden und Zubereiten von Lebensmitteln in der Küche und bei Tisch.(beispielhafte Abbildung siehe Anlage)Der Charakter des Schneidebretts wird durch das Holz bestimmt."Holzware zur Verwendung bei Tisch oder in der Küche, aus Bambus, Schneidebrett (zusammengesetzte Ware aus Holz - charakterbestimmend - und Kunststoff); sog. Bambus-Schneidebrett."

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 14.Nov.2016 - 13.Nov.2019

Rectangular glass cutting board for kitchen sinks, made of matte, tempered float glass with plastic lugs on the short sides of the underside

Description auto translated : Glassware for use in the kitchen, so-called glass cutting board for kitchen rinses, photo see attachment, - in the form of a rectangular plate with ground edges and rounded corners, - in the dimensions: approx. 54 cm x (width) x 30 cm (depth) x 0, 5 cm (height), - of matt pre-stressed glass (according to the application of thermally hardened float glass), - on the narrow side of the underside with plastic positioning edges. "Glassware for use in the kitchen, not of glass ceramics, no drinking glass, of pre-tempered glass"

Original Description: Glasware zur Verwendung in der Küche, sog. Glasschneidebrett für Küchenspülen, Foto siehe Anlage, - in Form einer rechteckigen Platte mit geschliffenen Kanten und abgerundeten Ecken, - in den Abmessungen: ca. 54 cm x (Breite) x 30 cm (Tiefe) x 0,5 cm (Höhe), - aus mattem, vorgespanntem Glas (laut Antrag aus thermisch gehärtetem Floatglas),- an den Schmalseiten der Unterseite mit Stellkanten aus Kunststoff."Glasware zur Verwendung in der Küche, nicht aus Glaskeramik, kein Trinkglas, aus vorgespanntem Glas"

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code :
CN Code :

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 25.Jul.2019 - 24.Jul.2022

rounded edge cutting board, typically used in the kitchen as a base for cutting with a knife

Description auto translated : The product is a rounded cutting board (art. No. 26063, dimensions: approx. 34, 5 x 24, 5 x 0, 9 cm) made of - according to the application data - polyethylene, a plastic as defined in note 1 to chapter 39 The board roughened on the surface is provided with a handle opening on a narrow side. It is usually used in the kitchen as a base when cutting with a knife. The product is sealed with a printed paper insert in plastic film. The chopping board is to be classified as 'Houseware, of plastics, Articles for kitchen use, not of code 3924 1000 11 0 to 3924 1000 20 0'.

Original Description: Die Ware ist ein an den Ecken abgerundetes Schneidebrett (Art. Nr. 26063, Abmessungen: ca. 34,5 x 24,5 x 0,9 cm) aus - laut Antragsangaben - Polyethylen, einem Kunststoff im Sinne der Anmerkung 1 zu Kapitel 39. Das auf der Oberfläche aufgeraute Brett ist mit an einer Schmalseite mit einer Grifföffnung versehen. Es dient üblicherweise in der Küche als Unterlage beim Schneiden mit einem Messer.Das Erzeugnis ist mit einem bedruckten Papiereinleger in Kunststofffolie eingeschweißt.Das Schneidebrett ist als "Haushaltsartikel aus Kunststoffen, Artikel für den Küchengebrauch, nicht von den Codenummern 3924 1000 11 0 bis 3924 1000 20 0 erfasst" einzureihen.

Source : EU Binding Tariff Information
source link :

click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge

US Customs Ruling (CROSS)

Dünya Gümrük ÖrgütüHS Code :
HTS Code :

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2021-12-16T00:00:00

plastic cutting boards

The merchandise under consideration is a two-pack cutting board, item# 3970-2PK. Each cutting board comprises 60% polypropylene (PP) and 40% medium density fiberboard (MDF). The top and bottom surface of both boards are made of polypropylene with an MDF core. The large cutting board measures approximately 11.8 inches long by 7.9 inches wide by .39 inches thick. The small cutting board measures approximately 9.84 inches long by 6.29 inches wide by .39 inches thick. The two cutting boards are packaged together for retail sale.

Description : plastic cutting boards

Source : US Customs Ruling (CROSS)
source link :

click image to enlarge
click image to enlarge

Image(s) shown above is/are not part of the related US Customs Ruling (CROSS) and placed by FindHS.codes for further clarification.

See also

By clicking "Find Related HS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "cutter boards".

You can also find customs duty rates applicable for importing of "cutter boards" into the USA and the European Union Countries.



Need an EXPERT assistance?


If you do not find what you are looking for, or if you cannot decide whether you find the correct results, you may apply for our tariff classification service

Tariff Classification Service

FIND THE CORRECT HS CODES
easily, anywhere



HS Code finder and HTS Code, HS Codes
close

Experience the convenience of Search by Image feature

don't show again

FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.