## Common ground
All options refer to flat-rolled steel products made from iron or various types of steel, categorized by material type, width, and surface treatment.
## Options at a glance
**7208 – Hot-rolled, wide, uncoated**
- **Defining trait:** Produced by hot rolling, with a width of 600 mm or more, and no coating or cladding.
- **Typical examples:** Heavy-duty structural sheets, industrial plates.
- **Best fit when:** The product is thick, made at high temperature, and used in construction or heavy industry without surface protection.
**7209 – Cold-rolled, wide, uncoated**
- **Defining trait:** Cold-rolled (cold-reduced), width ≥600 mm, no coating or cladding.
- **Typical examples:** Precision sheets for automotive parts, appliances.
- **Best fit when:** Smooth surface, dimensional accuracy, and higher strength are needed.
**7210 – Clad/plated/coated, wide**
- **Defining trait:** Wide (≥600 mm) with a cladding, plating, or coating layer applied.
- **Typical examples:** Galvanized steel sheets, clad stainless-steel panels.
- **Best fit when:** Corrosion resistance or enhanced surface properties are required.
**7211 – Narrow, uncoated**
- **Defining trait:** Width less than 600 mm, no coating or cladding.
- **Typical examples:** Small structural components, metal strips for machinery.
- **Best fit when:** The product is narrow and used in smaller-scale fabrication.
**7212 – Narrow, coated/clad/plated**
- **Defining trait:** Narrow (<600 mm) with surface treatment.
- **Typical examples:** Coated metal strips for roofing, decorative trim.
- **Best fit when:** Small size and surface protection are both important.
**7219 – Stainless steel, wide**
- **Defining trait:** Made of stainless steel, width ≥600 mm.
- **Typical examples:** Kitchen equipment sheets, architectural panels.
- **Best fit when:** Corrosion resistance and high durability are key.
**7220 – Stainless steel, narrow**
- **Defining trait:** Stainless steel, width less than 600 mm.
- **Typical examples:** Cut strips for medical devices, small fittings.
- **Best fit when:** Smaller stainless components needed.
**7225 – Other alloy steel, wide**
- **Defining trait:** Alloy steel (e.g., high-strength or tool steel), width ≥600 mm.
- **Typical examples:** Machinery parts, pressure vessel sheets.
- **Best fit when:** Special mechanical properties beyond standard steel are required.
**7226 – Other alloy steel, narrow**
- **Defining trait:** Alloy steel, width less than 600 mm.
- **Typical examples:** Precision strips for tools, engine components.
- **Best fit when:** Small-sized parts needing high strength or heat resistance.
## Key differences
| HS Code | Material Type | Width | Surface Treatment |
|--------|---------------------|-------------|------------------------|
| 7208 | Non-alloy steel | ≥600 mm | None |
| 7209 | Non-alloy steel | ≥600 mm | None |
| 7210 | Non-alloy steel | ≥600 mm | Clad/plated/coated |
| 7211 | Non-alloy steel | <600 mm | None |
| 7212 | Non-alloy steel | <600 mm | Clad/plated/coated |
| 7219 | Stainless steel | ≥600 mm | None |
| 7220 | Stainless steel | <600 mm | None |
| 7225 | Other alloy steel | ≥600 mm | None |
| 7226 | Other alloy steel | <600 mm | None |
## How to choose
1. Is the product made of stainless steel? → 7219 or 7220
2. Is it made of other alloy steel (e.g., tool, high-strength)? → 7225 or 7226
3. Is the width 600 mm or more? → Check 7208–7212 or 7219–7226 accordingly
4. Is it coated, plated, or clad? → 7210 or 7212
5. Was it hot-rolled or cold-rolled? → 7208 (hot) vs. 7209 (cold)
## Overlaps & pitfalls
A product may be both narrow and coated (e.g., 7212), or stainless and wide (7219). The main function determines priority: if corrosion resistance is key, prioritize material type; if size matters, use width. No option is inherently more important—choose based on the product’s **primary characteristic**