HS Code pour repose-jambes élévateurs


Produit
repose-jambes élévateurs
Code SH (6 chiffres)
8714.20.••.••

Le code SH à 6 chiffres pour repose-jambes élévateurs est 8714.20.

Les 6 premiers chiffres sont identiques dans tous les pays du Système harmonisé ; le code national complet à 8-10 chiffres (ex. TARIC UE, HTSUS États-Unis) dépend du pays de destination.

Exemples de produits pour "repose-jambes élévateurs"

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code : 8714.20
CN Code : 8714.20.••

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 23.Oct.2026 - 22.Oct.2029

Electric drive units for electric wheelchairs, consisting of two motorized assemblies with a 24V, 200W electric motor, a 33:1 gear ratio bevel gearbox, a flanged output shaft, an electrically released magnetic brake, a mechanical release lever with control signaling, and a connection cable for wheelchair control system, designed for standard wheelchair speed and mounted in pairs on both sides.

Description auto translated : Drive modules, so-called drive units, for electric wheelchairs, see attached photo: - in the form of two specially designed drive units, - as specified in the tender: - - essentially consisting of: - - - an electric motor (24 V, 200 W), - - - a bevel gear (6 km/h with a reduction ratio of 33:1), - - - an output shaft equipped with a mounting flange, - - - a magnetic brake mounted on the collector side of the electric motor; electrically released during operation and engages to safely stop the drive and thus the electric wheelchair when stationary or in case of sudden power failure, - - - a brake lever (swing lever) for mechanical release during push mode, with signaling in the control system and prevention of electrical driving function when the brake is mechanically released, - - - a connecting cable and plug for connection to the wheelchair control unit; specifically designed for the standard speed of electric wheelchairs, - installed in pairs (left and right) on wheelchairs, - due to their design and dimensions clearly intended exclusively for wheelchairs for disabled persons under position 8713. 'Parts for wheelchairs under position 8713 (drive modules)'

Original Description: Antriebsmodule sog. Fahrantriebseinheit für Elektrorollstühle, Foto siehe Anlage, - in Form von zwei speziell konstruierten Antriebseinheiten, - laut Antrag: - - im Wesentlichen bestehend aus: - - - einem Elektromotor (24 Volt, 200 Watt), - - - einem Winkelgetriebe (6 km/h mit einer Übersetzung von 33:1), - - - einer mit Befestigungsflansch versehenen Abgangswelle, - - - einer Magnetbremse, die an der Kollektorseite des Elektromotors angeflanscht ist;         wird im Betriebszustand elektrisch gelöst und bremst im Stand oder bei plötzlichem         Spannungsabfall den Antrieb und somit den Elektrorollstuhl sicher ab, - - - einem Bremshebel (Schwenkhebel) zur mechanischen Entriegelung für den Schiebebetrieb mit        Signalisierung in der Steuerung und Verhinderung der elektrischen Fahrfunktion bei        mechanisch gelöster Bremse, - - - einem Anschlusskabel und Stecker zum Anschluss an die Rollstuhlsteuerung, - - speziell für die übliche Geschwindigkeit von Elektrorollstühlen ausgelegt, - werden paarweise (links und rechts) an Rollstühlen montiert, - aufgrund der Bauform und Abmessungen erkennbar ausschließlich für Rollstühle für   Behinderte der Position 8713 bestimmt. "Teile für Rollstühle der Position 8713 (Antriebsmodule)"

Source : EU Binding Tariff Information
source link :

TR-BTI

Dünya Gümrük ÖrgütüHS Code : 8714.20
HS Code : 8714.20.••.••.••

Reference Number :

Issuing Country : TURKEY

Date Of Issue : 19.Feb.2026

Description : The item commercially described as "front wheel for wheelchair" is defined as having a size of 4 inches, an outer diameter of 103 mm, a tire width of 33 mm, two ball bearings in the center, and an outer layer of plastic (PU) on an aluminum body. It is assessed that the item should be classified under HS Code 8714. 20. 00. 00. 00 due to the business activity of the sender and the company applying for the BTB (Biological Product Declaration). However, if the manufacturer does not produce wheelchair accessories and the company applying for the BTB is not engaged in medical health services, the item should be classified under HS Code 7616. 99. 90. 90. 19.

Original Description: " Engelli sandalyesine ait ön tekerlek " ticari tanımlı eşya; 4” boyutunda olduğu, 103mm dış çapa, 33 mm lastik genişliğine sahip olduğu, ortasında iki adet bilyalı rulman bulunduğu, alüminyumdan mamul gövde üzerinde plastikten (PU) mamul dış bir katman bulunduğu, anlaşılmıştır.Söz konusu eşyanın göndericisinin ve BTB için başvuran firmanın iştigal alanı sebebiyle 8714.20.00.00.00 GTİP’inde sınıflandırılması, eşyanın imalatçısının tekerlekli sandalye aksesuarları üretmediği ve BTB için başvuran firmanın medikal sağlık hizmetleri ile iştigal olmadığı durumda başvurulması halinde ise eşyanın 7616.99.90.90.19 GTİP’inde sınıflandırılması gerektiği değerlendirilmektedir.

Source : TR-BTI

click image to enlarge
click image to enlarge

Image(s) shown above is/are not part of the related TR-BTI and placed by FindHS.codes for further clarification.

US Customs Ruling (CROSS)

Dünya Gümrük ÖrgütüHS Code : 8714.20
HTS Code : 8714.20.••••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2025-09-10T00:00:00

Cupholder and mounting system packaged together for retail sale, designed exclusively for use on wheelchairs

Description : cupholder and mounting system used on wheelchairs

Source : US Customs Ruling (CROSS)
source link :

click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge
click image to enlarge

Image(s) shown above is/are not part of the related US Customs Ruling (CROSS) and placed by FindHS.codes for further clarification.

En cliquant sur le bouton "Trouver le code SH associé" ci-dessus, vous pouvez trouver le code HS universel à 6 chiffres (valable pour presque tous les pays du monde) et les codes déclarables pour l'UE, le Royaume-Uni, les États-Unis, le Japon, la Chine, l'Inde et la Turquie (par ex. Code TARIC à 10 chiffres pour les pays de l'UE ou code HTSUS pour les États-Unis) de "repose-jambes élévateurs".

Vous pouvez également trouver les taux de droits de douane applicables à l'importation de "repose-jambes élévateurs" aux États-Unis et dans les pays de l'Union européenne.



Need an EXPERT assistance?


If you do not find what you are looking for, or if you cannot decide whether you find the correct results, you may apply for our tariff classification service

FIND THE CORRECT HS CODES
easily, anywhere

Available on Google Play and Apple App Store


HS Code finder and HTS Code, HS Codes
close

Experience the convenience of Search by Image feature

don't show again

FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.