## Common ground
All options are types of adhesive tapes classified by material, structure, and width.
## Options at a glance
**3919.10 – Thin plastic rolls**
- **Defining trait:** Made of plastic, self-adhesive, ≤20 cm wide
- **Typical examples:** Labeling tape, craft tape, small packaging tape
- **Best fit when:** Used for narrow, flexible applications like sealing small boxes or labeling
**3919.90 – Wide plastic rolls**
- **Defining trait:** Made of plastic, self-adhesive, >20 cm wide
- **Typical examples:** Industrial sealing tapes, large packaging wraps
- **Best fit when:** Requires broad coverage, e.g., wrapping large shipments
**4008.11 – Porous rubber tape**
- **Defining trait:** Made of porous vulcanized rubber, adhesive on surface
- **Typical examples:** Sealing strips for windows, gaskets
- **Best fit when:** Needs flexibility and air/liquid sealing in joints
**4008.21 – Non-porous rubber tape**
- **Defining trait:** Made of non-porous vulcanized rubber, fully sealed surface
- **Typical examples:** Waterproof seals, electrical insulation tapes
- **Best fit when:** Requires moisture or chemical resistance
**4811.41 – Paper-based self-adhesive**
- **Defining trait:** Made from paper/cardboard, self-adhesive layer
- **Typical examples:** Address labels, gift wrap tape, office labeling
- **Best fit when:** Temporary or low-strength use, eco-friendly preference
**4811.49 – Paper with non-self-adhesive adhesive**
- **Defining trait:** Paper coated with adhesive that is not self-adhesive (requires activation)
- **Typical examples:** Pressure-sensitive adhesive sheets, transfer tapes
- **Best fit when:** Adhesive must be applied via pressure or heat
**7019 – Fiberglass adhesive tape**
- **Defining trait:** Made of fiberglass fabric with adhesive coating
- **Typical examples:** Electrical insulation, high-temp repair tape
- **Best fit when:** High strength, heat resistance needed
**7607.19 – Aluminum foil only (no backing)**
- **Defining trait:** Pure aluminum foil without support layer or adhesive backing
- **Typical examples:** Thermal insulation wraps, reflective shielding
- **Best fit when:** No adhesive layer; used as a barrier or reflector
**7607.20 – Aluminum foil with backing & adhesive**
- **Defining trait:** Aluminum foil bonded to a carrier (e.g., plastic/paper) with adhesive
- **Typical examples:** HVAC sealing tape, decorative tapes
- **Best fit when:** Needs durability and adhesion on uneven surfaces
## Key differences
| HS Code | Material Type | Adhesive Type | Width Limit | Backing Layer? |
|--------|---------------------|-------------------|-------------|----------------|
| 3919.10| Plastic, narrow | Self-adhesive | ≤20 cm | No |
| 3919.90| Plastic, wide | Self-adhesive | >20 cm | No |
| 4008.11| Porous rubber | Adhesive surface | N/A | No |
| 4008.21| Non-porous rubber | Adhesive surface | N/A | No |
| 4811.41| Paper/cardboard | Self-adhesive | N/A | No |
| 4811.49| Paper/cardboard | Not self-adhesive | N/A | Yes (coated) |
| 7019 | Fiberglass | Adhesive coating | N/A | No |
| 7607.19| Aluminum foil | None | N/A | No |
| 7607.20| Aluminum + backing | Self-adhesive | N/A | Yes |
## How to choose
- Is the tape made of plastic and ≤20 cm wide? → 3919.10
- Is it made of plastic and >20 cm wide? → 3919.90
- Is it rubber-based and porous? → 4008.11
- Is it rubber-based and non-porous? → 4008.21
- Is it paper-based and self-adhesive? → 4811.41
- Is it paper-based but adhesive not self-adhesive? → 4811.49
- Is it fiberglass with adhesive? → 7019
- Is it pure aluminum foil (no backing)? → 7607.19
- Is it aluminum foil with a backing and adhesive? → 7607.20
## Overlaps & pitfalls
- A tape can be both paper-based and self-adhesive (4811.41), but not if the adhesive requires activation (4811.49).
- Aluminum foil tapes may seem similar, but 7607.19 has no adhesive or backing—only foil.
- If a product has multiple features (e.g., wide plastic with adhesive), prioritize **material and width** over other traits.
- No priority rule is implied; choose based on the **main function or defining material**