Flat sterilization roll. The product is a sterilization package (bag) consisting of two layers interconnected at the sides of medical paper and multilayer film, which is in a roll. The goods serve as outer packaging during the sterilization process and subsequent storage of medical devices. Provides protection against contamination. The goods are cut from the roll according to the size of the sterilized material and after inserting the object (scissors, scalpels, tweezers, etc.. ) into the bag is then heat sealed at both ends by a certified or calibrated welder (pulse, continuous). Before closing the package and sterilizing it directly, air is removed from the package by squeezing it. The goods are made of a combination of medical paper and 5-layer PP / PE foil in a roll with a length of 100 meters. The basis weight of the paper is 60g / m2. The sides of the goods are joined by a triple weld, which guarantees their strength. The goods have indicators for steam, ethylene oxide and formaldehyde sterilization, which are located outside the active field. The indicators are repeated every 10 cm.
auto translated : The text above has been translated automatically.
[1][1]. SKBTI305580/21/232#742404
The goods are a sterilization roll. It is made of a white TYVEK type material, which is made of polyethylene, and a multilayer film, which is composed of a layer of polyester and a layer of ethylene-vinyl acetate copolymer. The goods are produced in a roll with a width of 40 mm to 500 mm and a length of 70 m. The sides of the goods are joined by a triple weld, which guarantees their strength. The goods have indicators for steam, ethylene oxide and formaldehyde sterilization, which are located outside the active field. The indicators are repeated every 10 cm. The goods are cut from the roll according to the size of the sterilized material and after inserting the object (scissors, scalpels, tweezers, etc.) into the package (bag) it is subsequently heat sealed at both ends by a certified or calibrated welder (pulse, continuous) before closing the package and its direct sterilization removes air from the package by squeezing it. The goods represent a sterilization package (bag) in a roll. The product consists of two layers, one layer is opaque polyethylene (TYVEK) and the other layer is a multilayer translucent film, which are connected to each other at the sides. The goods serve as outer packaging during the sterilization process and subsequent storage of medical devices. Provides protection against contamination.
auto translated : The text above has been translated automatically.
[1][1]. SKBTI152489/22/137#767943
flat, two-walled pouch consisting of a rectangular sheet of paper and a sheet of bluish clear plastic material which is heat sealed on three sides. The fourth side of the plastic is not sealed to form the mouth of the pouch into which medical instruments are then sealed by application of an adhesive strip that is folded and pressed into place. The instrument is then sterilized by application of steam or ethylene oxide. The paper face of the pouch is printed with symbols which turn an appropriate color to indicate the completion of the sterilization process.
[1] Please importantly note that only the relevant portion of the related is displayed above. You may refer to the said customs ruling for the entire ruling explanation.
[1]. https://rulings.cbp.gov/ruling/N040340
a short piece cut, of a sterilization roll (flat) which is an approximately 2-7/8” wide sleeve, open at both ends and made of the same materials as Sample 1. It is presumed that the imported product will be a continuous roll, used either to make pouches like item 1, or to be cut to required lengths directly by end users who want to make their own sterilization sleeves.
[1] Please importantly note that only the relevant portion of the related is displayed above. You may refer to the said customs ruling for the entire ruling explanation.
[1]. https://rulings.cbp.gov/ruling/N040340