CN CodeDescriptionSupplementary Unit
8529.90.92.20- - - - - - - Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
8529.90.92.25- - - - - - - LCD modules, not combined with touch screen facilities, solely consisting of: -|one or more TFT glass or plastic cells, -|a die cast heat sink, -|a backlight unit, -|one printed circuit board with micro controller, and -|LVDS (Low Voltage Differential Signalling) interface, for use in the manufacture of radios for motor vehicles
8529.90.92.32- - - - - - - Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading|8528
8529.90.92.37- - - - - - - Fastening and covering ledges of aluminium alloy containing: -|silicon and magnesium, -|with a length of 300|mm or more but not more than 2|200|mm, specifically shaped for use in the manufacture of TV sets
8529.90.92.40- - - - - - - Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors
8529.90.92.41- - - - - - - Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors
8529.90.92.42- - - - - - - Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527|or 8528
8529.90.92.43- - - - - - - Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply
8529.90.92.45- - - - - - - Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats
8529.90.92.47- - - - - - - Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of|analogue or digital, monolithic integrated circuit|with pixels of| not more than 12|µm|!x!|12|µm in monochromic version with|microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel
8529.90.92.49- - - - - - - AC socket with a noise filter, composed of: -|AC socket (for power cord connection) of 230|V, -|integrated noise filter composed of capacitors and inductors, -|cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set
8529.90.92.53- - - - - - - Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT|glass panel of a LCD module
8529.90.92.55- - - - - - - OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities and one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors
8529.90.92.57- - - - - - - Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players
8529.90.92.59- - - - - - - LCD modules with: -|a diagonal measurement of the screen of 14,5|cm or more but not more than 25,5|cm, -|a LED backlight, -|a printed circuit board with EPROM (Erasable Programmable Read-only Memory), microcontroller, timing controller, LIN (Local Interconnect Network)bus or APIX2|(Automative Pixel Link) driver module and other active and passive components, -|6|to 8|pin plug for power supply and 2|to 4- pin LVDS (Low-voltage differential signalling) or APIX2|interface, -|whether or not in a housing, for permanent incorporation or permanent mounting into motor vehicles of Chapter 87
8529.90.92.63- - - - - - - LCD module -|with a diagonal measurement of the screen of 14,5|cm or more but not more than 38,5|cm, -|with or without a touch screen, -|with an LED backlight, -|with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components, -|with a plug for power supply and CAN and LVDS interfaces, -|with or without electronic components for dynamic adjustments of colour, -|in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system, suitable for installation in motor vehicles of Chapter 87
8529.90.92.65- - - - - - - OLED display consisting of: -|the organic layer with organic LEDs, -|two conductive layers on electron transfer and electron holes, -|layers of transistors (TFT) with| resolution of a 1920|x 1080 -|anode and cathode for power supply of organic diodes, -|RGB filter, -|glass or plastic protective layer, -|without the electronics for pixel addressing, for use in the manufacture of goods of headings 8528
8529.90.92.67- - - - - - - Colour LCD display panel for LCD monitors of heading 8528: -|with a diagonal measurement of the screen of 14,48|cm or more but not more than 31,24|cm, -|with or without a touch screen, -|with backlight, micro-controller, -|with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface, -|in a housing with or without a heat sink at the back of the housing, -|without a signal-processing module, -|whether or not with haptic and acoustical feedback, for use in the manufacture of vehicles of Chapter 87
8529.90.92.70- - - - - - - Rectangular fastening and covering frame: -|of an aluminium alloy containing silicon and magnesium, -|with a length of 500|mm or more but not more than 2|200|mm, -|with a width of 300|mm or more but not more than 1|500|mm, of a kind used for the production of TV sets
8529.90.92.75- - - - - - - Printed circuit board with LED diodes: - whether or not equipped with prisms/lens, and - whether or not fitted with connector(s) for the manufacture of backlight units for goods of heading|8528
8529.90.92.85- - - - - - - Colour LCD module in a housing: -|with a diagonal screen measurement of 14.48|cm or more but not more than 26|cm, -|without touch screen, -|with a backlight and micro-controller, -|with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector, -|without a signal processing module, -|with control electronics for pixel addressing only, -|with a motorised mechanism for moving the display screen, for permanent installation in vehicles of Chapter 87
8529.90.92.99- - - - - - - Other
8529.90.97.00- - - - - - Other
8529.90.97.10- - - - - - - Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
8529.90.97.20- - - - - - - Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
8529.90.97.90- - - - - - - Other
8529Parts suitable for use solely or principally with the apparatus of headings|8525|to 8528
8529.10- Aerials and aerial reflectors of all kinds; parts suitable for use therewith
- - Aerials
8529.10.11.00- - - Telescopic and whip-type aerials for portable apparatus or for apparatus for fitting in motor vehicles
- - - Outside aerials for radio or television broadcast receivers
8529.10.31.00- - - - For reception via satellite
8529.10.39.00- - - - Other
8529.10.65.00- - - Inside aerials for radio or television broadcast receivers, including built-in types
8529.10.65.10- - - - For use in civil aircraft
8529.10.65.90- - - - Other
8529.10.69.00- - - Other
8529.10.80.00- - Aerial filters and separators
8529.10.80.10- - - For use in civil aircraft
8529.10.80.20- - - Ceramic filter package comprising 2|ceramic filters and 1|ceramic resonator for a frequency of 10,7|MHz (±30|kHz), contained in a housing
8529.10.80.50- - - Ceramic filter for a centre frequency of 450|kHz (±1,5|kHz) or 455|kHz (±1,5|kHz), with a bandwidth of not more than 30|kHz at 6|dB and not more than 70|kHz at 40|dB, contained in a housing
8529.10.80.60- - - Filters, excluding surface acoustic wave filters, for a center frequency of 485|MHz or more but not more than 1|990|MHz with an insertion loss of not more than 3,5|dB, contained in a housing
8529.10.80.70- - - Ceramic filters -|with an applicable frequency range of 10|kHz or more but no more than 100|MHz -|with a housing of ceramic plates provided with electrodes of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment
8529.10.80.90- - - Other
8529.10.95.00- - Other
8529.90- Other
8529.90.15.00- - Organic light-emitting diode modules and organic light-emitting diode panels for the apparatus of subheadings 8528|72|or 8528|73
- - Other
8529.90.20.00- - - Parts of apparatus of subheadings|8525|60|00, 8525|80|30, 8528|42|00, 8528|52|10|and 8528|62|00
- - - Other
8529.90.41.00- - - - Cabinets and cases
8529.90.41.00- - - - - Of wood
8529.90.49.00- - - - - Of other materials
8529.90.65.00- - - - Electronic assemblies
8529.90.65.10- - - - - Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
8529.90.65.15- - - - - Electronic assembly comprising at least -|a printed circuit -|processors for multi-media applications and video signal processing -|FPGA (Field Programmable Gate Array) -|Flash memory -|operating|memory -|HDMI, VGA, USB and RJ-45|interfaces -|sockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel
8529.90.65.20- - - - - Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
8529.90.65.25- - - - - Printed circuit board assembly comprising: -|a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, -|a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems
8529.90.65.30- - - - - Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing
8529.90.65.40- - - - - Printed circuit board subassembly, comprising: -|a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly,|with a signal decoder, -|a radio frequency|(RF) remote control receiver, -|an infrared remote control signal transmitter, -|a SCART signal generator -|a TV state sensor for use in the manufacture of home entertainment systems
8529.90.65.45- - - - - Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of|products falling within heading 8527
8529.90.65.50- - - - - Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528
8529.90.65.65- - - - - Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT|glass panel of a LCD module
8529.90.65.75- - - - - Modules comprising at least semiconductor chips for: • the generation of driving signals for pixel addressing, or • driving addressing pixels
8529.90.65.80- - - - - Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading|8527
8529.90.65.85- - - - - Assembly consisting of at least: -|an audio frequency amplifier unit, |comprising at least an audio frequency amplifier and a sound generator, -|a transformer and -|a radio broadcast receiver |for use in the manufacture of consumer electronic products
8529.90.65.90- - - - - Other
- - - - Other
8529.90.91.00- - - - - Light-emitting diode (LED) backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (LCDs)
- - - - - Other
8529.90.92.00- - - - - - For television cameras of subheadings|8525|80|11|and 8525|80|19|and apparatus of headings|8527|and 8528
8529.90.92.10- - - - - - - Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
8529.90.92.15- - - - - - - LCD modules, -|solely consisting of one or more TFT glass or plastic cells, -|not combined with touch screen facilities, -|with one or more printed circuits boards with control electronics for pixel addressing only, -|with or without backlight unit and -|with or without inverters


FindHS.Codes PLUS Service is opened for BETA test.

FindHS.Codes PLUS works on top of FindHS.Codes and it extends searching capabilities of FindHS.Codes by employing ontology, natural language processing and special artificial intelligence algorithms techniques. You may use the link below for more information.

More about FindHS.CodesPLUS

Please importantly note that the system is in beta test. We highly appreciate your comments and feedbacks. Thank you very much for your interest.