Please importantly note that eight digits HS Codes presented within FindHS.Codes search results are based on European Union Customs Tariff Nomenclature. Therefore, when an 8 digits HS Code is shown as a result of your search, you need to take the first 6 digits of that HS Code into consideration if the country of interest is not a part of European Union Customs Territory.

FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.

CN CodeDescription 7303 7305
7304.00.00.00Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
7304.11.00.00- Line pipe of a kind used for oil or gas pipelines
7304.11.00.00- - Of stainless steel
7304.11.00.10- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.11.00.90- - - Other
7304.19.00.00- - Other
7304.19.10.00- - - Of an external diameter not exceeding 168,3 mm
7304.19.10.20- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.19.10.80- - - - Other
7304.19.30.00- - - Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm
7304.19.30.20- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.19.30.80- - - - Other
7304.19.90.00- - - Of an external diameter exceeding 406,4 mm
7304.22.00.00- Casing, tubing and drill pipe, of a kind used in drilling for oil or gas
7304.22.00.00- - Drill pipe of stainless steel
7304.22.00.20- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.22.00.80- - - Other
7304.23.00.00- - Other drill pipe
7304.23.00.20- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.23.00.80- - - Other
7304.24.00.00- - Other, of stainless steel
7304.24.00.20- - - Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.24.00.80- - - Other
7304.29.00.00- - Other
7304.29.10.00- - - Of an external diameter not exceeding 168,3 mm
7304.29.10.20- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.29.10.80- - - - Other
7304.29.30.00- - - Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm
7304.29.30.20- - - - Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.29.30.80- - - - Other
7304.29.90.00- - - Of an external diameter exceeding 406,4 mm
7304.29.90.10- - - - Casings
7304.29.90.90- - - - Other
7304.31.00.00- Other, of circular cross-section, of iron or non-alloy steel
7304.31.00.00- - Cold-drawn or cold-rolled (cold-reduced)
7304.31.20.00- - - Precision tubes
7304.31.80.00- - - Other
7304.31.80.30- - - - Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.31.80.99- - - - Other
7304.39.00.00- - Other
7304.39.10.00- - - Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall thicknesses
7304.39.52.00- - - Other
7304.39.52.00- - - - Threaded or threadable tubes (gas pipe)
7304.39.52.00- - - - - Plated or coated with zinc
7304.39.58.00- - - - - Other
7304.39.58.30- - - - - - Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.39.58.99- - - - - - Other
7304.39.92.00- - - - Other, of an external diameter
7304.39.92.00- - - - - Not exceeding 168,3 mm
7304.39.92.30- - - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.39.92.99- - - - - - Other
7304.39.93.00- - - - - Exceeding 168,3 mm but not exceeding 406,4 mm
7304.39.93.20- - - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.39.93.80- - - - - - Other
7304.39.98.00- - - - - Exceeding 406,4 mm
7304.41.00.00- Other, of circular cross-section, of stainless steel
7304.41.00.00- - Cold-drawn or cold-rolled (cold-reduced)
7304.41.00.10- - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7304.41.00.90- - - Other
7304.49.00.00- - Other
7304.49.10.00- - - Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall thicknesses
7304.49.93.00- - - Other
7304.49.93.00- - - - Of an external diameter not exceeding 168,3 mm
7304.49.93.10- - - - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7304.49.93.90- - - - - Other
7304.49.95.00- - - - Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm
7304.49.95.10- - - - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7304.49.95.90- - - - - Other
7304.49.99.00- - - - Of an external diameter exceeding 406,4 mm
7304.49.99.10- - - - - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7304.49.99.90- - - - - Other
7304.51.00.00- Other, of circular cross-section, of other alloy steel
7304.51.00.00- - Cold-drawn or cold-rolled (cold-reduced)
7304.51.12.00- - - Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum, of a length
7304.51.12.00- - - - Not exceeding 0,5 m
7304.51.18.00- - - - Exceeding 0,5 m
7304.51.81.00- - - Other
7304.51.81.00- - - - Precision tubes
7304.51.89.00- - - - Other
7304.51.89.30- - - - - Of an external diameter not exceeding 406,4 mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.51.89.99- - - - - Other
7304.59.00.00- - Other
7304.59.10.00- - - Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses
7304.59.32.00- - - Other, straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum, of a length
7304.59.32.00- - - - Not exceeding 0,5 m
7304.59.38.00- - - - Exceeding 0,5 m
7304.59.92.00- - - Other
7304.59.92.00- - - - Of an external diameter not exceeding 168,3 mm
7304.59.92.30- - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.59.92.99- - - - - Other
7304.59.93.00- - - - Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm
7304.59.93.20- - - - - With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
7304.59.93.80- - - - - Other
7304.59.99.00- - - - Of an external diameter exceeding 406,4 mm
7304.90.00.00- Other
7304.90.00.10- - With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7304.90.00.91- - Other
7304.90.00.91- - - Tubes and pipes, of stainless steel
7304.90.00.99- - - Other

What can be done in this page?

  1. You may select one of the available countries by using the drop-down box above the screen.
  2. Then, the goods of the selected heading for the selected country are listed.
  3. Specific to FindHS.Codes, you may click on any of the listed 4- or 6-digits HS Codes to see the images and other details of the related products on the right-hand side of the screen.