HS Code for clamps for sawing machines


Product
clamps for sawing machines
HS Code (6-digit)
8466.20.••.••
See full HS code

The 6-digit HS code for clamps for sawing machines is 8466.20.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Sample products for "clamps for sawing machines"

World Customs Organization Harmonized System Committee Classification Rulings Session 30

Dünya Gümrük Örgütü HS Code : 8466.20

Reference No :

Electrostatic chuck (ESC) consisting of an aluminium pedestal with a thin copper film between layers of polyimide. The polyimide coating protects the copper from the plasma and from arcing. The pedestal bolts to the surface of the simplified cathode. The ESC pedestal is either notched or flatted, depending on the type of wafer being used.
Helium channels cut into the top and bottom of the ESC distribute helium across the back of the wafer. The helium flow increases heat transfer from the wafer to the ESC pedestal. This helps prevent photoresist reticulation on the wafer. The helium is routed up through the cathode to the back of the wafer.
When a plasma ignites the chamber, it creates a charge at the backside of the wafer. A positive DC voltage is then applied to the copper film of the ESC. This results in a charge opposite in polarity to the charge at the backside of the wafer. The opposite charges attract, forming an electrostatic bond between the wafer and the ESC. This "chucks" the wafer, keeping the wafer in place when the backside helium pressure is enabled. After processing, the backside helium pressure is reduced and the voltage is lowered, allowing the plasma to dissipate the excess static charge. This "dechucks" the wafer. After dechucking, the wafer is ready to be transferred out of the chamber.

Source : World Customs Organization Harmonized System Committee Classification Rulings Session 30

US Customs Ruling (CROSS)

HTS Code : 8466.20

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2005-02-15T00:00:00

Pipe and Tubing Notcher is a work holder fixture used to secure metal tubing while making notches from 0 to 45 degrees in 1-degree increments using a hole saw on a drill press. It is mounted to a drill press table via a mounting plate and includes components such as a clamp assembly, spindle support, angle indicator, and adjustment plate. It accepts ½ inch and 5/8 inch threaded arbor hole saws and requires approximately 14 inches of clearance between the drill chuck and table. The item does not include a hole saw.

Description : pipe and tubing notcher

Source : US Customs Ruling (CROSS)
source link :

See also

By clicking "Find Related HS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "clamps for sawing machines".

You can also find customs duty rates applicable for importing of "clamps for sawing machines" into the USA and the European Union Countries.



Need an EXPERT assistance?


If you do not find what you are looking for, or if you cannot decide whether you find the correct results, you may apply for our tariff classification service

Tariff Classification Service

FIND THE CORRECT HS CODES
easily, anywhere

Available on Google Play and Apple App Store


HS Code finder and HTS Code, HS Codes
close

Experience the convenience of Search by Image feature

don't show again

FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.