What is the HS code for contact electrodes?

Q: What is the HS code for contact electrodes?

The 6-digit HS code for contact electrodes is 8515.90. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

HS Code for contact electrodes

Product

contact electrodes

HS Code (6-digit)

8515.90.••.••

See full HS code

The 6-digit HS code for contact electrodes is 8515.90.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Sample products for "contact electrodes"

TR-BTI

HS Code :	8515.90

Reference Number :

Issuing Country : TURKEY

Date Of Issue : 11.May.2004 - 31.Dec.2006

Description : Goods as a set containing the materials required for attaching and soldering the strain gage used in strength tests on the part to be stress tested. The article is in a bag and contains materials such as glue, degreaser, solutions, paper, tape, solder paste, solder wire.

Original Description: Mukavemet testlerinde kullanılan genlik pullarının (strain gage) gerilimi test edilecek parçanın üzerine tutturulması ve lehimlenmesi için gerekli malzemeleri içeren set halinde eşya.Eşya bir çantanın içindedir ve yapıştırıcı, yağ çözücü,solüsyonlar, kağıt,bant,lehim pastası,lehim teli gibi malzemeler içermektedir.

Source : TR-BTI

click image to enlarge

US Customs Ruling (CROSS)

HTS Code :	8515.90

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2006-12-01T00:00:00

AirMig amp gun assembly is a welding gun with built-in fume extraction, designed to remove hazardous fumes during arc welding by using an air extraction nozzle in the handle; it must be connected to a welding machine and an air exhaust system to function, and is classified as a part of a welding machine.

Description : AirMig amp gun

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :

EU Binding Tariff Information

CN Code :	8515.90

BTI Reference :

Issuing Country : SLOVENIA

Date Of Issue : 25.Mar.2015 - 24.Mar.2021

unfinished feeder wire, housed in a metal and plastic casing with an electric motor, pneumatic control valve and feed mechanism

Description auto translated : The product is unfinished feeder wire. Feeder housing with dimensions of 805 x 214 x 429 mm made of metal and plastic. In the housing is mounted an electric motor, an electric pneumatic control valve and the feed mechanism. The casing has a connector for the torch, two quick connectors, connector for welding current 10-pin connector, water connection and three connections for gas. Feeder is part of the welding machine and be installed in the electric welding machine.

Original Description: Izdelek je nedokončan podajalnik varilne žice. Ohišje podajalnika z merami 805 x 214 x 429 mm je narejeno iz kovine in plastike. V ohišju je nameščen elektromotor, električni pnevmatski ventil in podajalni mehanizem. Na ohišju je priključek za gorilnik, dva hitra priključka, priključek za varilni tok, 10 polni konektor, priključek za vodo in trije priključki za plin. Podajalnik predstavlja del varilnega aparata in se ga vgradi v elektroobločni varilni aparat.

Source : EU Binding Tariff Information
source link :

click image to enlarge