Waterproof fuse holder - used in the automotive industry, where it ensures the connection of a flat fuse to electrical cabling. It consists of a plastic casing and metal contacts. There are wiring wires on both sides.
auto translated : The text above has been translated automatically.
[1][1]. SKBTI107956/22/114#765565
9-piece fuse holder - consists of a plastic case with metal contacts for 9 pieces of knife fuses. The holder contains fuses from 10A to 20A. It is used to connect fuses to the electrical circuit and thus provides protection of the electrical circuit.
auto translated : The text above has been translated automatically.
[1][1]. SKBTI483830/21/325#754602
Fuse holder - plastic body designed to insulate and hold electrical contacts and blade fuse. It does not contain metal contacts, terminals or any other conductive materials. Conductive elements (cables) are inserted into the plastic body, which are insulated from each other, and the blade lock together with the plastic body form the fuse holder. The body isolates the individual conductive contacts from each other, thus preventing short circuits and at the same time protecting it from the outside environment. It is used for fitting a knife fuse in electrical cabling in the automotive industry.
auto translated : The text above has been translated automatically.
[1][1]. SKBTI250344209/19/228#662386
Insulated electrical cable, so-called "fuse holder", in two different versions, - consisting of two insulated electrical conductors (8 AWG) with a length of about 350 mm, each with one end to an electrical plug-in device with a socket for receiving a 8 A or 10 A flat fuse (not part of this vZTA decision) in a plastic housing (dimensions: approx. 78 x 18 x 24 mm) with removable cover cap connected, at the other cable ends without connection piece, - for a voltage of 32 volts, - for use as an electrical connection cable in the automotive industry. The product is not covered by code numbers 8544 4210 00 0 to 8544 4290 80 0 as "Insulated electrical cable, not of subheadings HS 8544 11 to 8544 30, for a voltage of 1000 volts or less, fitted with fittings" classified.
auto translated : The text above has been translated automatically.
[1][1]. DEBTI56353/18-1#622669
The product with the article designation "fuse holder, article number: 1135", in the form of a not yet assembled goods, consists essentially of a plastic housing with an approximately cuboid basic shape and application-specific formations and two contact elements, which after cable installation (cable is not the subject of the decision via a binding tariff information) into the plastic housing and locked. The finished product is used to make an electrical connection after plugging in a flat fuse (not subject to the decision on a binding tariff information) and is designed for a voltage of less than 1000 V. The goods are classified as "electrical equipment for connecting electrical circuits for a voltage of 1000 V or less, not for coaxial cables or printed circuits, not for certain aircraft, not covered by TARIC codes 8536 6990 51 to 8536 6990 88". Appendix: 1 figure
auto translated : The text above has been translated automatically.
[1][1]. DEBTI8227/18-1#597599