HS Code for hollow needles for injection aspiration biopsy and transfusion

Q: What is the HS code for hollow needles for injection aspiration biopsy and transfusion?

The 6-digit HS code for hollow needles for injection aspiration biopsy and transfusion is 9018.32. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Product

hollow needles for injection aspiration biopsy and transfusion

HS Code (6-digit)

9018.32.••.••

See full HS code

The 6-digit HS code for hollow needles for injection aspiration biopsy and transfusion is 9018.32.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Sample products for "hollow needles for injection aspiration biopsy and transfusion"

Aviler

CN Code :	9018.32

Issuing Country : European Union Countries

Surgical needle stubs: Made of stainless steel, length 44 mm, circular cross-section, outer diameter 1.3 mm. and inner diameter is 0.9 mm. are needle drafts with one end cut vertically and the other end cut at an acute angle. This last tip is then recut and sharpened in two stages to turn it into a pointed tip.

Source : Aviler

TR-BTI

HS Code :	9018.32

Reference Number :

Issuing Country : TURKEY

Date Of Issue : 29.Apr.2020 - 31.Dec.2019

Description : IT IS THE NEEDLE THAT PROVIDES INSURANCE OF ANESTHETIC DRUG TO THE SPINAL REGION. THE PATIENT IS INTERVENED WITH A NEEDLE, MEDICATION IS GIVEN AND THE NEEDLE IS REMOVED FROM THE PATIENT AND THE PROCESS IS FINISHED.

Original Description: SPİNAL BÖLGEYE ANESTEZİK İLACIN VERİLMESİNİ SAĞLAYAN İĞNEDİR. HASTAYA İĞNE İLE GİRİŞİM YAPILIR, İLAÇ VERİLİR VE HASTADAN İĞNE ÇIKARILIP İŞLEM BİTİRİLİR.

Source : TR-BTI

click image to enlarge

US Customs Ruling (CROSS)

HS Code :	9018.32
HTS Code :	9018.32.••••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2008-05-15T00:00:00

Non-coring deflected tip (Huber tip) needle for use with the LAP-BAND AP access port, available in two lengths: 89 mm (3.5 inches) and 51 mm (2.0 inches). Made of 304-grade stainless steel shaft with a plastic hub. Supplied sterile and intended for single use during gastric band adjustment procedures.

Description : three Lap-band related items

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :