What is the HS code for isotropic electric field probes?

Q: What is the HS code for isotropic electric field probes?

The 6-digit HS code for isotropic electric field probes is 9030.40. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

HS Code for isotropic electric field probes

Product

isotropic electric field probes

HS Code (6-digit)

9030.40.••.••

See full HS code

The 6-digit HS code for isotropic electric field probes is 9030.40.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Sample products for "isotropic electric field probes"

EU Binding Tariff Information

HS Code :	9030.40
CN Code :	9030.40.••

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 23.Oct.2026 - 22.Oct.2029

Digital broadband RF monitoring receiver with a rectangular housing, HF antenna input, interfaces, one or more converter modules, digital processor cores, memory modules, synchronization board, status LEDs, and other electronic components. Used for measuring high-frequency AC voltage at the HF antenna input, determining resulting electrical parameters, capturing the time-varying voltage of radio signals, and digitally outputting data to a higher-level unit. Designed for signal acquisition, spectrum analysis, signal recording, and technical radio monitoring.

Description auto translated : Digital broadband RF monitoring receiver, available in various configurations, essentially consisting of a rectangular housing with an RF antenna input, interfaces, one or more converter modules (depending on configuration), digital processor cores, memory modules, a synchronization board, status LEDs, and other electrical and electronic components (see figure in the attachment). The receiver is used to measure high-frequency alternating voltage at the RF antenna input, determine resulting electrical parameters, and thus ascertain the time-varying waveform of an RF signal, providing digitized output of the measured data to a higher-level unit (not part of this vZTA decision). It is intended for signal acquisition, spectrum analysis, signal recording, and technical radio monitoring. The product is classified as 'instrument for measuring or testing electrical quantities, excluding meters under heading 9028, specially designed for telecommunications, other than subheadings (HS) 9030 10 to 9030 39'.

Original Description: Digitaler Breitband-Funküberwachungsempfänger, in verschiedenen Ausführungen, im Wesentlichen bestehend aus einem quaderförmigen Gehäuse mit einem HF-Antenneneingang, Schnittstellen, einem oder mehreren Wandler-Modulen (je nach Ausführung), digitalen Rechnerkernen, Speichermodulen, einem Synchronisations-Board, Status-LEDs sowie weiteren elektrischen und elektronischen Bauteilen (siehe Abbildung in der Anlage). Der Empfänger dient dem Messen der hochfrequenten elektrischen Wechselspannung am HF-Antenneneingang sowie der Ermittlung der daraus resultierenden elektrischen Größen und somit der Bestimmung des zeitlichen Verlaufs der elektrischen Spannung eines Funksignals sowie der digitalisierten Ausgabe der ermittelten Daten an eine übergeordnete Einheit (nicht Gegenstand dieser vZTA-Entscheidung). Er ist für die Signalerfassung, Spektrumsanalyse, Signalaufzeichnung und technische Funküberwachung bestimmt. Die Ware wird als "Gerät zum Messen oder Prüfen elektrischer Größen, ausgenommen Zähler der Position 9028, seiner Beschaffenheit nach besonders für die Telekommunikation bestimmt, anderes als Unterposition (HS) 9030 10 bis 9030 39" eingereiht

Source : EU Binding Tariff Information
source link :

UK Advance Tariff Rulings

HS Code :	9030.40
HS Code :	9030.40.••.••

Ruling Number :

Date Of Issue : 12.Jan.2025 - 11.Jan.2028

Handheld microwave analyser with LCD display, battery operation, and multiple RF ports for measuring signal strength, link quality, antenna performance, and interference in satellite and RF systems. Capable of functioning as spectrum analyser, oscilloscope, network analyser, power meter, and vector network analyser (VNA) to assess S-parameters, impedance matching, and signal integrity.

Description : A handheld microwave analyser that is a portable, battery-operated device designed for testing and analysing high-frequency signals in the microwave and RF (radio frequency) range. It is a handheld device with an LCD display screen and carry strap. On the top of the unit, there are two RF connection ports, a GPS receiver, and an external reference trigger input. On the right side, there is also a LAN port, two USB ports, an SD card slot, an external reference and trigger output, and the wideband intermediate frequency output. On the left side of the unit, there is a headphone jack, DC bias variable voltage source, and charging port. This analyser is a versatile RF test instrument which can measure many parameters. It is configurable as a cable, an antenna analyser, network analyser, spectrum analyser, and power meter. When applied to satellite communication systems, this handheld microwave analyser can be used to test satellite signal strength, link quality, and antenna performance, ensuring reliable satellite communication. It also behaves like a spectrum analyser and an oscilloscope, enabling the user to measure the amplitude of signals across a range of frequencies. It can detect and analyse signal integrity and interference issues, for example noise. This is itself important for identifying sources of interference or signal degradation, which can affect network performance, especially in critical communication systems. The handheld microwave analyser can be used as a vector network analyser (VNA), which also measures the S-parameters of components like antennas and cables. It is critical in testing the reflection, transmission, and impedance matching of RF components. The handheld microwave analyser is shipped within a protective hard case with foam insert.

Source : UK Advance Tariff Rulings
source link :

click image to enlarge

Image(s) shown above is/are not part of the related UK Advance Tariff Rulings and placed by FindHS.codes for further clarification.

US Customs Ruling (CROSS)

HS Code :	9030.40
HTS Code :	9030.40.••••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2007-05-23T00:00:00

CIQ-100 CableIQ Qualification tester, a portable handheld battery-operated device used by network technicians to troubleshoot cabling issues and verify cable performance for required bandwidth, capable of detecting faults, wiremap errors, speed/duplex mismatches, and isolating cabling problems from networking issues, operating in the RF spectrum up to 250 MHz and measuring transmission characteristics of copper and coaxial cables

Description : CIQ-100

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :

By clicking "Find Related HS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "isotropic electric field probes".

You can also find customs duty rates applicable for importing of "isotropic electric field probes" into the USA and the European Union Countries.