The merchandise under consideration is three LED modules for use in automotive applications, i.e., reverse and front parking lamps. The LED modules will be further manufactured into the finished automotive lamp assembly after importation. The reverse lamp LED modules are identified as TESLA M3 SAE/ECE LG Reverse LH BU180 and TESLA M3 SAE/ECE LG Reverse RH BU180. Each LED module has four LEDs, a printed circuit board, a connector and a heat sink. The LEDs will illuminate when connected to power converter/driver in the side signal lamp. The front parking LED module is identified as P552 FRONT PRK TRN GEN2 BU168. It has an LED, a printed circuit board, a wire pigtail, a plastic light pipe coupler and a heat sink. The LED will illuminate when connected to the power converter/driver in the headlamp. The module will illuminate at full intensity in the “turn” function and will illuminate at a lower intensity in the “park” function.
[1] Please importantly note that only the relevant portion of the related is displayed above. You may refer to the said customs ruling for the entire ruling explanation.
[1]. https://rulings.cbp.gov/ruling/N311830