HS Code for tubes and pipes of aluminum alloys


Product
tubes and pipes of aluminum alloys
HS Code (6-digit)
7608.20.••.••
See full HS code

The 6-digit HS code for tubes and pipes of aluminum alloys is 7608.20.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Sample products for "tubes and pipes of aluminum alloys"

US Customs Ruling (CROSS)

Dünya Gümrük ÖrgütüHS Code : 7608.20
HTS Code : 7608.20.••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2002-08-05T00:00:00

Aluminum rectangular tubes varying in width from 40 – 200 mm, in height from 15 – 60 mm and in thickness which could vary from 1.20 mm – 4.50mm

Description : aluminum extrusions

Source : US Customs Ruling (CROSS)
source link :

EU Binding Tariff Information

CN Code : 7608.20

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 20.Oct.2016 - 19.Oct.2019

aluminium tube, a concentric hollow cylinder with a constant circular cross-section of 22.5 mm in diameter and 5.6 mm wall thickness, made from aluminium alloy EN AW-6082, manufactured by extrusion process, used as a vibration damper

Description auto translated : Aluminum tube. The product is a concentric hollow cylinder with a circular cross-section that remains the same over the entire length of 75.2 mm and has a uniform wall thickness of approx. 5.6 mm (tube). The outer diameter is approximately 22.5 mm. The length of the pipe exceeds the diameter more than twice. According to the information, the pipe is made of an aluminum alloy (EN AW-6082) and is manufactured using the extrusion process. The pipe, after being covered, is used as a vibration damper.The product is classified according to its nature as "pipe of aluminum alloys, extruded only" under subheading 7608 20 of the Harmonized System.

Original Description: Aluminiumrohr. Bei der Ware handelt es sich um einen konzentrischen Hohlzylinder mit einem über die gesamte Länge von 75,2 mm gleichbleibendem, kreisförmigen Querschnitt mit gleichmäßiger Wanddicke von ca. 5,6 mm (Rohr). Der äußere Durchmesser beträgt ca. 22,5 mm. Die Länge des Rohres überschreitet den Durchmesser mehr als zweimal. Nach den Angaben besteht das Rohr aus einer Aluminiumlegierung (EN AW-6082) und wird im Strangpressverfahren hergestellt. Das Rohr wird nach einer Ummantelung als Schwingungsdämpfer verwendet.Die Ware ist nach ihrer Beschaffenheit als "Rohr aus Aluminiumlegierungen, nur stranggepresst" in die Unterposition 7608 20 des Harmonisierten Systems einzureihen.

Source : EU Binding Tariff Information
source link :

See also

By clicking "Find Related HS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "tubes and pipes of aluminum alloys".

You can also find customs duty rates applicable for importing of "tubes and pipes of aluminum alloys" into the USA and the European Union Countries.



Need an EXPERT assistance?


If you do not find what you are looking for, or if you cannot decide whether you find the correct results, you may apply for our tariff classification service

Tariff Classification Service

FIND THE CORRECT HS CODES
easily, anywhere

Available on Google Play and Apple App Store


HS Code finder and HTS Code, HS Codes
close

Experience the convenience of Search by Image feature

don't show again

FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.