What is the HS code for vectroscopes?

Q: What is the HS code for vectroscopes?

The 6-digit HS code for vectroscopes is 9030.89. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

HS Code for vectroscopes

Product

vectroscopes

HS Code (6-digit)

9030.89.••.••

See full HS code

The 6-digit HS code for vectroscopes is 9030.89.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Sample products for "vectroscopes"

EU Binding Tariff Information

HS Code :	9030.89
CN Code :	9030.89.••.••

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 28.Sep.2026 - 27.Sep.2029

Analog input module for measuring electrical parameters including phase voltage, frequency, current, and power in energy distribution networks and industrial systems, featuring voltage and current inputs, A/D conversion, digital output via bus interface, and integration with primary sensors.

Description auto translated : Analog input module for signal acquisition, essentially consisting of a populated printed circuit board with a plastic housing for DIN-rail mounting (30 x 132 x 124 mm), featuring a status LED, terminal screws, BUS connection, three current measurement inputs, three voltage measurement inputs, an A/D converter, electrical interface, and additional electrical and electronic components (see illustration in the annex). The module is used for direct measurement of phase voltages and frequency. It also receives phase current values via a primary transducer (not subject to this vZTA decision). It is installed between field devices and the CPU within power distribution networks and industrial plants. Both the measured parameters (frequency and voltage) determined by the module itself, as well as the current signal received from the primary sensor, are converted into digital values, from which additional parameters (e.g., active power) are calculated before the data is transmitted via system bus to a higher-level unit (not subject to this vZTA decision). The module combines measurement and signal conversion functions, with no single predominant function identifiable. The product is classified as 'device for measuring or testing electrical quantities (frequency, current, voltage, power) without recording device, not a meter under position 9028, other than sub-position (HS) 9030 10 to 9030 40, not a device for measuring or testing semiconductor wafers or semiconductor components'.

Original Description: Sog. analoges Eingangsmodul, im Wesentlichen bestehend aus einer bestückten Leiterplatte mit Kunststoffgehäuse zur Hutschienenmontage (30 x 132 x 124 mm) mit Status-LED, Schraubklemmen, BUS-Anschluss, drei Strommesseingängen, drei Spannungsmesseingängen, A/D-Wandler, elektrischer Schnittstelle sowie weiteren elektrischen und elektronischen Bauteilen (siehe Abbildung in der Anlage). Das Modul dient der direkten Messung der Phasenspannungen sowie der Frequenz. Des Weiteren erhält es die Werte der Phasenströme über ein primäres Messglied (nicht Gegenstand dieser vZTA-Entscheidung). Hierzu wird es zwischen Feldgeräten und der CPU innerhalb von Energieverteilungsnetzen sowie Industrieanlagen platziert. Sowie die selbst ermittelten Messgrößen (Frequenz und Spannung) als auch das vom Primärsensor eingehende Stromsignal werden in digitale Werte umgesetzt und aus ihnen zusätzlich weitere Parameter errechnet (u.a. Wirkleistung), bevor die Daten über Systembus an eine übergeordnete Einheit (nicht Gegenstand dieser vZTA-Entscheidung) ausgegeben werden. Das Modul kombiniert Mess- und Umsetzungstätigkeit, wobei eine Haupttätigkeit nicht feststellbar ist. Die Ware wird als "Gerät zum Messen oder Prüfen elektrischer Größen (Frequenz, Strom, Spannung, Leistung) ohne Registriervorrichtung, kein Zähler der Position 9028, anderes als Unterposition (HS) 9030 10 bis 9030 40 erfasst, kein Gerät zum Messen oder Prüfen von Halbleiterscheiben (wafers) oder Halbleiterbauelementen" eingereiht.

Source : EU Binding Tariff Information
source link :

UK Advance Tariff Rulings

HS Code :	9030.89
HS Code :	9030.89.••.••

Ruling Number :

Date Of Issue : 01.Dec.2025 - 30.Nov.2028

Magnetic Sensor Board (PCBA) detects magnet positions in three dimensions for collision, lift detection, and docking in robotic lawn mowers. Made of PCB with sensors, resistors, capacitors, and connectors. Designed by Husqvarna Group, manufactured to specifications, tested for quality. Protected during transport with anti-static bag and cushioned packaging.

Description : The Magnetic Sensor Board (PCBA) is used in robotic lawn mowers to detect the position of magnets in three dimensions. This functionality is crucial for collision and lift detection, as well as for docking the mower in the charging station. The Magnetic Sensor Board is made from a printed circuit board (PCB) that includes various electronic components such as sensors, resistors, capacitors, and connectors. The Magnetic Sensor Board is designed by the Husqvarna Group and manufactured by suppliers according to specific specifications. The manufacturing process involves assembling the electronic components onto a PCB, soldering them in place. The units are tested by suppliers to ensure they meet Husqvarna's quality standards before shipping. The Magnetic Sensor Board works by detecting the position of magnets in three dimensions. This information is used by the mower's control system to determine if the mower has collided with an object or if it has been lifted. It also helps in accurately docking the mower in the charging station. The Magnetic Sensor Board is typically packaged in an anti-static bag to protect it from electrostatic discharge during transportation. It is then placed in a protective box with cushioning materials to prevent damage. The packaging includes labels with product information and handling instructions

Source : UK Advance Tariff Rulings
source link :

click image to enlarge

Image(s) shown above is/are not part of the related UK Advance Tariff Rulings and placed by FindHS.codes for further clarification.

US Customs Ruling (CROSS)

HS Code :	9030.89
HTS Code :	9030.89.••••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2025-09-30T00:00:00

EA-PSI 10000 Programmable DC Power Supplies are devices that convert grid energy into a regulated DC voltage with up to 96 percent efficiency. They provide a stable and adjustable DC voltage and current output, allowing users to digitally set and control parameters for testing and measuring the electrical characteristics of components, circuits, or electronic devices such as IoT devices, medical products, mobile phones, and remote industrial sensors

Description : Programmable DC Power Supply

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :

click image to enlarge

Image(s) shown above is/are not part of the related US Customs Ruling (CROSS) and placed by FindHS.codes for further clarification.

By clicking "Find Related HS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "vectroscopes".

You can also find customs duty rates applicable for importing of "vectroscopes" into the USA and the European Union Countries.