HTS Code for shearing machines for metals


Product
shearing machines for metals
HS Code (6-digit)
8462.39.••.••
See full HTS code

The 6-digit HS code for shearing machines for metals is 8462.39.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Shearing machines (including presses), other than combined punching and shearing machines

Sample products for "shearing machines for metals"

UK Advance Tariff Rulings

Dünya Gümrük ÖrgütüHS Code : 8462.39
HS Code : 8462.39.••.••

Ruling Number :

Date Of Issue : 24.Nov.2023 - 23.Nov.2026

Rotary Mesh Expander continuously transforms narrow lead alloy strips into wide, trimmed expanded mesh for battery plates

Description : Rotary Mesh Expander The Rotary Mesh Expander continuously expands relatively narrow 7.6 to 15.2 cm or (3.0 to 6.0 in.) lead alloy strip into a wider 38 cm (15 in) maximum, trimmed expanded mesh material. The mesh is subsequently filled with active paste material, cut into specific widths, and used as battery plates in lead-acid batteries. The Expander is powered by a Drive System consisting of one master drive and two slave drives. The machine is numerically controlled as it is motor driven. The rotary expansion process operates in four steps: 1) The lead strip is pre-stretched and slit in a unique fashion by a custom designed Toolstand assembly. 2) The preformed material is grasped by three pairs of endless silent chain, one pair on the machine centre line and two pairs on the outside borders. As the material is pulled through the machine, the outside pairs of chains diverge progressively away from the centre pair, causing the preformed material to spread apart to form a network of diamonds. The final mesh height can be adjusted to the design specification and the borders reduced in width by rotating trimmer blades. 3) The mesh is first pre-flattened and then sized by a coining roll assembly to a specific mesh thickness. 4) The final stage is performed by the stretcher assembly, which elongates the centre border to match any outside edge increase in length. This operation, in conjunction with the mesh flattener rollers, produces flat, undulation-free mesh, providing the mesh is opened to the design size. After these four main steps, the mesh may be fed continuously to further processing equipment (tab blanker, paster, plate divider, oven, and stacker) in a battery plate line or coiled for inventory. The Rotary Mesh Expander runs relatively quiet with a speed capacity of 60 m/min (200 ft/min) or 800 plates/min.

Source : UK Advance Tariff Rulings
source link :

EU Binding Tariff Information

Dünya Gümrük ÖrgütüHS Code : 8462.39
CN Code : 8462.39.••.••

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 16.Jun.2026 - 15.Jun.2029

Lever roller scissors with steel base plate, chrome steel cutting wheels, hand lever with ratchet mechanism and gear transmission, designed for manual stationary cutting of sheet metal up to 3 mm thickness, including aluminum and copper sheets, in industrial or workshop environments.

Description auto translated : Lever roller scissors (see appendix for illustration) - Essentially consisting of a steel base plate, two round rotating ones   Cutting wheels (cutting knives) made of chrome steel, hand lever with ratchet mechanism   mus and gear transmission, - designed for sheets with a thickness of 3 mm, - is used for manual and stationary cutting and processing of various   Sheet metal (e.g. aluminum sheet or copper sheet) with a maximum thickness of 3 mm   in industrial areas or in workshops. "Machine tool for shearing metals, machine for shearing flat   certificates, not numerically controlled - lever roller shears"

Original Description: Hebelrollenschere (Abbildung siehe Anlage) - im Wesentlichen bestehend aus einer Grundplatte aus Stahl, zwei runden rotierenden   Schneidrädern (Schneidmessern) aus Chrom-Stahl, Handhebel mit Ratschenmechanis-   mus und Zahnradgetriebe, - konzipiert für Bleche mit einer Dicke von 3 mm, - dient zum manuellen und stationären Schneiden und Bearbeiten von verschiedenen   Blechen (z.B. Aluminium-Blech oder Kupferblech) mit einer maximalen Dicke von 3 mm   im industriellen Bereich oder in Werkstätten. "Werkzeugmaschine zum Scheren von Metallen, Maschine zum Scheren von Flacher-   zeugnissen, nicht numerisch gesteuert - Hebelrollenschere"

Source : EU Binding Tariff Information
source link :

US Customs Ruling (CROSS)

Dünya Gümrük ÖrgütüHS Code : 8462.39
HTS Code : 8462.39.••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2014-03-31T00:00:00

Strip trimming machine/decoiler for removing steel strip from coils, unrolling it, and trimming impurities. Power-driven machine that works by shearing metal, classified as a shearing machine under heading 8462.

Description : Laser Cutting Machine, a Tube Welding Machine, a Feed Channel/ Tube Puller, and a Strip Trimming Machine/ Decoiler

Source : US Customs Ruling (CROSS)
source link :

See also

By clicking "Find Related HTS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "shearing machines for metals".

You can also find customs duty rates applicable for importing of "shearing machines for metals" into the USA and the European Union Countries.



Need an EXPERT assistance?


If you do not find what you are looking for, or if you cannot decide whether you find the correct results, you may apply for our tariff classification service

Tariff Classification Service

FIND THE CORRECT HS CODES
easily, anywhere

Available on Google Play and Apple App Store


HS Code finder and HTS Code, HS Codes
close

Experience the convenience of Search by Image feature

don't show again

FindHS.Codes website uses cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. Please refer to our privacy policy for more information. By continuing to use FindHS.Codes you agree to the use of cookies.