What is the HTS code for spectrum analyzers?

Q: What is the HTS code for spectrum analyzers?

Possible 6-digit HS codes for spectrum analyzers: 9030.89, 9030.40. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

HTS Code for spectrum analyzers

Product

spectrum analyzers

HS Code (6-digit)

9030.89.••.•• 9030.40.••.••

See full HTS code

Possible 6-digit HS codes for spectrum analyzers: 9030.89, 9030.40.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Spectrum analysers are instruments which identify the different frequency components of an electrical input signal. They are mainly used to analyse electrical quantities. They can also analyse ionising radiations, sound waves or other non-electrical quantities when used in conjunction with radiation detectors or other devices which can detect non-electrical quantities and convert them into electrical signals.

Sample products for "spectrum analyzers"

EU Binding Tariff Information

HS Code :	9030.89
CN Code :	9030.89.••.••

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 28.Sep.2026 - 27.Sep.2029

Analog input module for measuring electrical parameters including phase voltage, frequency, current, and power in energy distribution networks and industrial systems, featuring voltage and current inputs, A/D conversion, digital output via bus interface, and integration with primary sensors.

Description auto translated : Analog input module for signal acquisition, essentially consisting of a populated printed circuit board with a plastic housing for DIN-rail mounting (30 x 132 x 124 mm), featuring a status LED, terminal screws, BUS connection, three current measurement inputs, three voltage measurement inputs, an A/D converter, electrical interface, and additional electrical and electronic components (see illustration in the annex). The module is used for direct measurement of phase voltages and frequency. It also receives phase current values via a primary transducer (not subject to this vZTA decision). It is installed between field devices and the CPU within power distribution networks and industrial plants. Both the measured parameters (frequency and voltage) determined by the module itself, as well as the current signal received from the primary sensor, are converted into digital values, from which additional parameters (e.g., active power) are calculated before the data is transmitted via system bus to a higher-level unit (not subject to this vZTA decision). The module combines measurement and signal conversion functions, with no single predominant function identifiable. The product is classified as 'device for measuring or testing electrical quantities (frequency, current, voltage, power) without recording device, not a meter under position 9028, other than sub-position (HS) 9030 10 to 9030 40, not a device for measuring or testing semiconductor wafers or semiconductor components'.

Original Description: Sog. analoges Eingangsmodul, im Wesentlichen bestehend aus einer bestückten Leiterplatte mit Kunststoffgehäuse zur Hutschienenmontage (30 x 132 x 124 mm) mit Status-LED, Schraubklemmen, BUS-Anschluss, drei Strommesseingängen, drei Spannungsmesseingängen, A/D-Wandler, elektrischer Schnittstelle sowie weiteren elektrischen und elektronischen Bauteilen (siehe Abbildung in der Anlage). Das Modul dient der direkten Messung der Phasenspannungen sowie der Frequenz. Des Weiteren erhält es die Werte der Phasenströme über ein primäres Messglied (nicht Gegenstand dieser vZTA-Entscheidung). Hierzu wird es zwischen Feldgeräten und der CPU innerhalb von Energieverteilungsnetzen sowie Industrieanlagen platziert. Sowie die selbst ermittelten Messgrößen (Frequenz und Spannung) als auch das vom Primärsensor eingehende Stromsignal werden in digitale Werte umgesetzt und aus ihnen zusätzlich weitere Parameter errechnet (u.a. Wirkleistung), bevor die Daten über Systembus an eine übergeordnete Einheit (nicht Gegenstand dieser vZTA-Entscheidung) ausgegeben werden. Das Modul kombiniert Mess- und Umsetzungstätigkeit, wobei eine Haupttätigkeit nicht feststellbar ist. Die Ware wird als "Gerät zum Messen oder Prüfen elektrischer Größen (Frequenz, Strom, Spannung, Leistung) ohne Registriervorrichtung, kein Zähler der Position 9028, anderes als Unterposition (HS) 9030 10 bis 9030 40 erfasst, kein Gerät zum Messen oder Prüfen von Halbleiterscheiben (wafers) oder Halbleiterbauelementen" eingereiht.

Source : EU Binding Tariff Information
source link :

UK Advance Tariff Rulings

HS Code :	9030.40
HS Code :	9030.40.••.••

Ruling Number :

Date Of Issue : 12.Jan.2025 - 11.Jan.2028

Handheld microwave analyser with LCD display, battery operation, and multiple RF ports for measuring signal strength, link quality, antenna performance, and interference in satellite and RF systems. Capable of functioning as spectrum analyser, oscilloscope, network analyser, power meter, and vector network analyser (VNA) to assess S-parameters, impedance matching, and signal integrity.

Description : A handheld microwave analyser that is a portable, battery-operated device designed for testing and analysing high-frequency signals in the microwave and RF (radio frequency) range. It is a handheld device with an LCD display screen and carry strap. On the top of the unit, there are two RF connection ports, a GPS receiver, and an external reference trigger input. On the right side, there is also a LAN port, two USB ports, an SD card slot, an external reference and trigger output, and the wideband intermediate frequency output. On the left side of the unit, there is a headphone jack, DC bias variable voltage source, and charging port. This analyser is a versatile RF test instrument which can measure many parameters. It is configurable as a cable, an antenna analyser, network analyser, spectrum analyser, and power meter. When applied to satellite communication systems, this handheld microwave analyser can be used to test satellite signal strength, link quality, and antenna performance, ensuring reliable satellite communication. It also behaves like a spectrum analyser and an oscilloscope, enabling the user to measure the amplitude of signals across a range of frequencies. It can detect and analyse signal integrity and interference issues, for example noise. This is itself important for identifying sources of interference or signal degradation, which can affect network performance, especially in critical communication systems. The handheld microwave analyser can be used as a vector network analyser (VNA), which also measures the S-parameters of components like antennas and cables. It is critical in testing the reflection, transmission, and impedance matching of RF components. The handheld microwave analyser is shipped within a protective hard case with foam insert.

Source : UK Advance Tariff Rulings
source link :

US Customs Ruling (CROSS)

HS Code :	9030.89
HTS Code :	9030.89.••••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2025-09-30T00:00:00

EA-PSI 10000 Programmable DC Power Supplies are devices that convert grid energy into a regulated DC voltage with up to 96 percent efficiency. They provide a stable and adjustable DC voltage and current output, allowing users to digitally set and control parameters for testing and measuring the electrical characteristics of components, circuits, or electronic devices such as IoT devices, medical products, mobile phones, and remote industrial sensors

Description : Programmable DC Power Supply

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :

click image to enlarge

Image(s) shown above is/are not part of the related US Customs Ruling (CROSS) and placed by FindHS.codes for further clarification.