What is the HTS code for superheater tubes?

Q: What is the HTS code for superheater tubes?

The 6-digit HS code for superheater tubes is 8404.90. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

HTS Code for superheater tubes

Product

superheater tubes

HS Code (6-digit)

8404.90.••.••

See full HTS code

The 6-digit HS code for superheater tubes is 8404.90.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

US Customs Ruling (CROSS)

HS Code :	8404.90
HTS Code :	8404.90.••••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2008-07-22T00:00:00

Condenser water chambers, including left hand intermediate, right hand intermediate, and center intermediate water boxes made of carbon or low alloy steel. Do not contain mechanical components. The left and right hand intermediate water boxes are approximately 6 feet long, 10 feet 11 inches wide at the base, and 26 feet 2 inches high. The center intermediate water box is approximately 6 feet long, 10 feet 2 inches wide at the base, and 26 feet 2 inches high. Used to mix and redirect water flow between tube bundle modules in a nuclear power plant condenser system.

Description : condenser tube bundle modules and condenser water chambers

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :

EU Binding Tariff Information

HS Code :	8404.90
CN Code :	8404.90.••.••

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 29.Apr.2021 - 28.Apr.2024

Inner tube, made of precision-fabricated stainless steel tubing (material number: 1.4301), with an outer diameter of 42.40, 60.05 or 70.05 mm and a wall thickness of 2.6 or 2.7 mm, seamless or longitudinally welded, with a surface hardness of HCR 27, ovality of 0.1 or 0.2 mm, and straightness deviation of 1 mm per meter, for use in a soot blower system to convey hot steam from the vent to the extendable lance.

Description auto translated : So-called inner tube, - made of a dimensionally accurate stainless steel tube (material number: 1. 4301) manufactured according to the drawing, depending on the model with an outer diameter of 42, 40, 60, 05 or 70.05 mm and a wall thickness of 2.6 or 2.7 mm, seamless (pilgered) or longitudinally welded, with a surface hardness HCR of 27, an ovality of 0.1 or 0.2 mm and a straightness of 1 mm Deviation per running meter, - for installation in a sootblower system to guide hot steam from the valve into the extendable lance. "Part, recognizable exclusively intended for a sootblower system - so-called inner tube"

Original Description: Sog. Innenrohr,- aus einem maßhaltig nach Zeichnung spezifisch gefertigten Rohr aus Edelstahl (Werkstoffnummer: 1.4301), je nach Modell mit einem Außendurchmesser von 42,40, 60,05 bwz. 70,05 mm und einer Wandstärke von 2,6 oder 2,7 mm, nahtlos (gepilgert) oder längsnahtgeschweißt, mit einer Ober- flächenhärte HCR von 27, einer Ovalität von 0,1 bzw 0,2 mm und einer Geradheit von 1 mm Abwei- chung auf den laufenden Meter,- zum Einbau in eine Rußbläseranlage um heißen Dampf vom Ventil in die ausfahrbare Lanze zu füh- ren."Teil, erkennbar ausschließlich für eine Rußbläseranlage bestimmt - sog. Innenrohr"

Source : EU Binding Tariff Information
source link :