What is the HTS code for warp beam?

Q: What is the HTS code for warp beam?

The 6-digit HS code for warp beam is 8448.49. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

HTS Code for warp beam

Product

warp beam

HS Code (6-digit)

8448.49.••.••

See full HTS code

The 6-digit HS code for warp beam is 8448.49.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

US Customs Ruling (CROSS)

HTS Code :	8448.49

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2005-04-25T00:00:00

Weaving machine temples are steel shafts with plastic rings and needle pins used to maintain the correct width of newly woven fabric in weaving machines; typically 4 to 6 inches long with a diameter of approximately ½ inch.

Description : weaving machine temples

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :

EU Binding Tariff Information

HS Code :	8448.49
CN Code :	8448.49.••.••

BTI Reference :

Issuing Country : GERMANY

Date Of Issue : 26.Apr.2021 - 25.Apr.2024

a ring-shaped plastic wheel with a one-sided sloping edge, consisting of 96 spikes (0.75 mm or 1.0 mm thick) and having an outer diameter of approximately 23 mm and an inner diameter of approximately 16 mm, designed for installation in the width holder of a loom to maintain the fabric's width during weaving.

Description auto translated : Plastic wheel, - in the form of a ring-shaped wheel made of plastic, sloping on one side on the outside, four rows with a total of 96 tips (thickness: 0.75 mm or 1.0 mm), with an outer diameter of approx. 23 mm and one inner diameter of approx. 16 mm (picture see attachment left and middle), - for installation in the so-called spreader of a weaving machine, which keeps the fabric at the width specified by the reed during weaving. "Part recognizable exclusively or mainly intended for weaving machines, other than reeds, healds and heald frames - so-called plastic wheels"

Original Description: Plastikrädchen,- in Form eines ringförmigen, an der Außenseite einseitig schräg abfallenden Rädchens aus Kunststoff, vierreihig mit insgesamt 96 Spitzen (Stärke: 0,75 mm bzw. 1,0 mm) besetzt, mit einem äußeren Durchmesser von ca. 23 mm und einem inneren Durchmesser von ca. 16 mm (Abbildung siehe Anlage links und Mitte),- zum Einbau in den sog. Breithalter einer Webmaschine, der das Gewebe beim Weben auf der durch das Webblatt festgelegten Breite hält."Teil, erkennbar ausschließlich oder hauptsächlich bestimmt für Webmaschinen, andere als Webeblätter, Weblitzen und Webschäfte - sog. Plastikrädchen"

Source : EU Binding Tariff Information
source link :

By clicking "Find Related HTS Code" button above, you can find 6 digits universal HS Code (which is valid for almost all countries in the world) and declarable codes for EU, UK, USA, Japan, China, India and Turkey (e.g. 10 digits TARIC code for EU countries or HTSUS code for USA) of "warp beam".

You can also find customs duty rates applicable for importing of "warp beam" into the USA and the European Union Countries.