HTS Code for waste parings and scrap of polymers of styrene

Q: What is the HTS code for waste parings and scrap of polymers of styrene?

The 6-digit HS code for waste parings and scrap of polymers of styrene is 3915.20. The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Product

waste parings and scrap of polymers of styrene

HS Code (6-digit)

3915.20.••.••

See full HTS code

The 6-digit HS code for waste parings and scrap of polymers of styrene is 3915.20.

The first 6 digits are the same in every country using the Harmonized System; the full 8-10 digit national code (e.g. EU TARIC, US HTSUS) depends on the destination country.

Sample products for "waste parings and scrap of polymers of styrene"

EU Binding Tariff Information

HS Code :	3915.20
CN Code :	3915.20.••.••

BTI Reference :

Issuing Country : FRANCE

Date Of Issue : 21.Nov.2006 - 20.Nov.2012

Plastic waste (polystyrene) from the destruction of disposable camera bodies during film removal.

Original Description: DÉBRIS DE MATIÈRE PLASTIQUE (POLYSTYRÈNE) PROVENANT DE LA CASSE DE BOÎTIERS D'APPAREILS PHOTOS JETABLES AU MOMENT DE L'EXTRACTION DE LA PELLICULE PHOTO.

Source : EU Binding Tariff Information
source link :

TR-BTI

HS Code :	3915.20
HS Code :	3915.20.••.••.••

Reference Number :

Issuing Country : TURKEY

Date Of Issue : 15.Dec.2006 - 15.Dec.2012

Waste from styrene polymers, which is formed as a result of the breaking of the runner parts when printing plastic parts

Description : Waste from styrene polymers, which is formed as a result of breaking the runner parts that come out while printing plastic parts.

Original Description: Plastik parçalar basılırken çıkan yolluk kısımlarının kırılması sonucu oluşan, stiren polimerlerinden atık.

Source : TR-BTI

click image to enlarge

US Customs Ruling (CROSS)

HS Code :	3915.20
HTS Code :	3915.20.••••

Ruling Number :

Issuing Country : UNITED STATES

Date Of Issue : 2009-08-06T00:00:00

Chopped label scrap made from a mix of polyethylene, polypropylene, polyethylene terephthalate, and polystyrene, with polystyrene predominating by weight. The material consists of ground-up pressure-sensitive label components including plastic sheeting and coated or uncoated paper, with adhesive backings of acrylic, hot melt, or rubber and silicone release agents. Used in extrusion and injection molding to produce reusable plastic composite pallets.

Description : chopped label scrap

Please importantly note that only the relevant portion of the related US Ruling (Cross) is displayed above. You may refer to the said customs ruling for the entire ruling explanation.

Source : US Customs Ruling (CROSS)
source link :